Before using this LED work light please read this manual and instructions for use
carefully, if you do not understand any of the instructions please do not use this light
and return it to your supplier. Please keep this manual for your reference.
The body of the lamp is made of high - pure Aluminium Alloy, with electrostatic
coating and thermostatic hardening, long life LED and lithium ion battery.
A mounting bracket connects the light to the floor standing frame.
watt - Led Light Head, Floor standing frame complete with Magnetic inlays, In car
charger and 240volt UK mains charger.
watt - Led Light Head, Floor standing frame, In car charger and 240volts UK mains
charger.
Construction industry, illumination for tunnels, building, road, bridge work, close
confinement work, basements, attics and any dark spaces requiring portable
lighting. Outdoor activities, accident surveys, emergency services, ports, camping
and security work.
)
10
20
Main Construction.
Contents(different for 10watt 20watt
Applications of Use
Instructions for use
1
Ensure that the light is in good condition with no visibie damage to the light
head glass front frame or chargers If you think that any of these items are
damaged please contact your supplier
)
,
,
.
.
2) Attach the 240volt mains charger and plug in to the mains for 5-6 hours,
under charging and overcharging on the initial charge could lead to battery
deficiency. Ensure the light is switched to the 0 position whilst charging as
you may damage the battery if charging whilst switched on. The light will not
work when recharging.
Part NO
LED10WRO
LED20WRO
In put
voltage
Frequency
Range
Power
Running
time
Charging
time
Li-ion Battery
AH & V
Charger
V & A
Protection
Grade
100-240V
100-240V
50/60HZ
50/60HZ
5W/10W
10W/20W
4-6Hours
3-6Hours
5-6Hours
5-6Hours
3.3AH 7.4V
6.6AH 7.4V
8.4V 1.2A
8.4V 2A
IP44
IP44
4) Remember to charge your Elite LED light periodically when not being used to
maintain a healthy battery.
1) Do not look directly at LED light for any length of time.
2)
3) Do not submerge the LED light in water
4)
5)
6)
7) Do not attempt to use the battery for any other purpose.
8)
9) This LED light is NOT for use in explosive atmospheres.
3) The three way switch operates by simply pressing down on one side to your
required light output. Press the switch to I and the light will operate on full
power, press the switch to II and the light output will run at 50%. Press the
switch to the 0 position and light will turn off.
Safety warnings
Do not shine the LED light directly in to anyone eyes.
Only use the charger supplied with this light failure to do so will damage the
battery and invalidate your warranty.
When recharging you must use the chargers supplied do not attempt to
charge by any other means.
Do not attempt any electrical repair on this LED light yourself, please return
it to your supplier. If you feel competent to replace the glass lens please do
so, replacement lenses are available from your supplier.
The light may start to flash repeatedly when the battery is low, should this
happen please place your light on charge as soon as possible.
.
Part NO
size
LED10WRO
118*92*3. mm
7
LED20WRO
155*128*3
mm
.7
Lumens
800LM
1600LM
If the glass lens is broken please immediately stop using the light and contact
your supplier for a new lens
,
.
