HS-Technik BTC-PB Operating Instructions Manual Download Page 21

Page: 21 / 24

- 21 -

7 Troubleshooting and Fault repair

The BTC-PN/PB by HS-Technik is a very long-lasting tool.

If, however, a device does not work properly you can find, and eliminate, the most

frequent causes for errors in the table below.

Error

Possible cause

Remedy

No function, no light

indications turned on

Missing power supply

Check the cable and the main

switch

SPS has no connection to the

BTC-PN/PB

1. Cable for the subnetwork

defective or not plugged in.

2. Connection cable defective

or not plugged in.

Check the cable

If the error still persists or is not listed, please contact HS-Technik GmbH.

Repairs:

Telephone: +49 (0)7628 / 91 11-0

E-mail:

[email protected]

Programming:

Telephone: +49 (0)7628 / 91 11-0

E-mail:

[email protected]

Please note the following information:

• Serial number of the device

• What error has occurred?

• Display

• When did the error first appear?

• What have you done to fix the error?

We reserve the right to make errors, technical changes to our products and changes to the

delivery program in the course of further development.

Summary of Contents for BTC-PB

























Search results

Summary of Contents for BTC-PB

Reviews:

Related manuals for BTC-PB

Brands by name

Popular brands

HS-Technik BTC-PB, Operating Instructions Manual

Search results

Summary of Contents for BTC-PB

Reviews:

Related manuals for BTC-PB

Brands by name

Popular brands