HRW Limited
HRW Data EKRXGSM 071105
Subject to change without notice
Page 7/9
Instructions (cont…)
To set the alarm notification SMS message
Send an SMS message to the EKRXGSM in the following format:
password:V(text message)
•
text message
is any sort of meaningful text message that describes to the recipient that an alarm or
other condition has been detected by the EKRXGSM’s alarm input circuit. If a null message (ie one
whithout any characters is set), the EKRXGSM will not send an alarm activated SMS
Eg: Sending the SMS “Password:V(Gate forced alarm)” will cause the EKRXGSM to send the SMS “Gate
forced alarm” to selected recipients when the EKRXGSM alarm input has been triggered.
Eg: Sending the SMS “Password:V()” will prevent the EKRXGSM from sending an alarm activated message
when the EKRXGSM alarm input has been triggered.
To set the alarm restored notification SMS message
Send an SMS message to the EKRXGSM in the following format:
password:U(text message)
•
text message
is any sort of meaningful text message that describes to the recipient that an alarm or
other condition has been detected by the EKRXGSM’s alarm input circuit as returning to a non alarm
state.
Eg: Sending the SMS “Password:U(Gate forced alarm reset)” will cause the EKRXGSM to send the SMS
“Gate forced alarm reset” to selected recipients when the EKRXGSM alarm input has been reset.
Eg: Sending the SMS “Password:U()” will prevent the EKRXGSM from sending an alarm reset message when
the EKRXGSM alarm input has been reset.
Sending multiple commands in one SMS
Multiple commands can be sent in one SMS by using the following format:
password:command1:command2:….commandx
etc
•
password
is the 5…8 character case sensitive alphanumeric master password
•
command1
etc are any of the above mentioned configuration commands
Eg: Sending the SMS “Password:D(ALL):E(ALL):A(00001EA5,0000)
:I
(0892481646,secret,1,1,1,1)” will
•
Delete all E-Keys and phone numbers
•
Add an E-Key with a serial number of 00001EA5 (derived from the S/N:N00001EA5 printed on the E-
Key label)
•
Add the landline phone number (08) 92481646 with a user password of “secret”
•
The number and SMS password are valid for use, grouped into group 1
•
The EKRXGSM will call the phone back for 5 seconds after receiving a successful activation from the
caller
•
The EKRXGSM will also send alarm and restore SMS messages if it’s alarm input circuit has been
activated and non zero alarm messages have been programmed
•
The default master password of “Password” was used
The number of contiguous commands sent is only limited to the total number of characters used in any one
SMS. Once the limit of 160 characters is used, the message should be trimmed to the last whole command.
