manualshive.com logo in svg

HRW BACnet HPE-MRBN, Manual, Page: 14 / 15

Share
Download
HRW BACnet HPE-MRBN Manual Download Page 14

 
 
 

 
 

HRW HPE-MRBN V401 Manual 170912            E. & O. E. / Subject to change without notice 

Page 14 of 15 

Technical Data 

 

Network Wiring 

 
 
 

 RS485 Comms Speed 

RS485 Network Capacity 

Power Supply 

 

Conformity & approvals 

 
 

Operating Temperature Range 

Storage Temperature Range 

Humidity Range 

Dimensions

  

Shielded twisted pair (shield grounded) 
Belden 9841 low capacitance twisted pair for RS485 networks 
(b foil shield, shield continuous throughout the network and 
grounded at network origin)  
RS485 - 2400, 4800, 9600, 19200, 38400, 57600, 76800 baud 
247 nodes over max. 1.2km without repeater 
24Vac, 50/60 Hz, max. 7.5VA 

   
 
 
 

0…50ºC (32…122ºF) 
-5…75ºC (-40…167ºF) 
10…95%rH (non-condensing) 
126mm (W) x 107mm (H) x 34.5mm (D)

Ordering Information 

HPE-MRBN 

Description: 

250 point gateway – Modbus RTU 485 integration of BACnet MS/TP device, for 
control panel mounting 

Standard package: 

40 units per carton 

 

Accessories 

 
HDA0002 

 

DIN rail adapter brackets, factory fitted 

 
HPECOMU 

 

Configuration cable (USB) 

 

Other HP_MR Series Devices 

 
HPC0662MR   

Universal Controller, 12 Point, Modbus RTU, 24Vac 

HPC8884MR 

Universal Controller, 28 Point, Modbus RTU, 24Vac

 

HPD0440BNMR 

Network HMI / Universal Ctrl / Scheduler / Modbus RTU gateway 
8 Point, BACnet MS/TP, 24Vac

 

HPD0460MR 

Network HMI, 12 Point, Modbus RTU, 24Vac

 

HPD0460MRC 

Network HMI / Universal Controller, 10 Point, Modbus RTU, 24Vac

 

HPD0460MRCT 

Network HMI / Universal Ctrl / Scheduler, 10 Point, Modbus RTU, 24Vac

 

HPD0460MRT 

Network HMI / Scheduler, 10 Point, Modbus RTU, 24Vac

 

HPE0662MR 

I/O expansion, 12 Point, Modbus RTU, 24Vac

 

HPE8884MR 

I/O expansion, 28 Point, Modbus RTU P, 24Vac

 

HPV0662MR 

VAV / Universal Controller, 13 Point, Modbus RTU, 24Vac

 

HPE-MRSMA 

Modbus gateway for SMA inverter devices, 250 point, 24Vac

 

 
Also available are gateways for Modbus RTU devices in to BACnet MS/TP and P1 FLN based networks 
 
 

Summary of Contents for BACnet HPE-MRBN
















Reviews:

No comments