HRT Mini-Cat UV-1, Manual

Page: 7 / 16

ss
Miniature VGA over CAT5 Extension System
5
Recommended Power Supply Connection
q
Cat 5 cable length of 0 to 150 feet:
It does not matter in which end you plug the power supply. Do
whatever is most convenient for your setup.
q
Cat 5 cable length of 150 to 300 feet:
We recommend that you plug the power supply at the receiving
end.
q
Cat 5 cable length of 300 to 500 feet:
Still you should plug the power supply at the receiving end,
however, depending the grounding of the video source (PC) and
the display device at the remote end, you may need to purchase an
additional power supply to power up both ends.
q
Cat 5 cable lengths over 500 feet:
Purchase of an additional power supply to power up both ends is
almost certainly needed.
3. Using Category-5 cable connect the UV1-Receiver to the unit's
RJ45 output. Connect the remote monitor to the receiver.
IMPORTANT
Do not connect this unit to any LAN device such as network cards or hubs
as this may cause damage. Use EIA/TIA 568B standard straight-through
patch wiring as shown below. Do not use crossover cables.
EIA/TIA 568B WIRING STANDARD
PIN Wire Color
1 White w/ Orange Stripe
2 Orange
3 White w/Green Stripe
4 Blue
5 White w/Blue Stripe
6 Green
7 White w/Brown Stripe
8 Brown