ii
PREFACE
Thank you for purchase of our manual crimping tool.
For safe operation read, understand and follow this Instruction Manual.
FOR SAFE OPERATION
The operators of the tool and the maintenance personnel who are in charge of maintenance and repair work are
required to read the following SAFETY INSTRUCTIONS .
Fully understand and follow the descriptions given in this Instruction Manual and the warning symbols attached to the
tool.
SAFETY INSTRUCTIONS
Basic safety instructions
1. Be sure to read understand and follow all the instructions and other materials supplied with the tool before use. Save this
Instruction Manual and make it available when necessary.
Safe operation
1.
Be sure to use the tool as instructed so that your fingers nor part of clothing is caught in the tool during crimping
operation.
Application
1.
This tool shall only be used for its originally intended purpose while following the instructions specified in this
Instruction Manual. Hirose assumes no responsibility for any misuse of the tool other than the intended use.
2.
Modifications to this tool is prohibited. We assume no responsibility for accidents resulting from modifications.
Maintenance
1. To prevent possible accidents caused by unfamiliarity with the operation of the tool, repair and adjustment of the tool
shall be conducted only by fully trained maintenance personnel. Any repair and adjustment beyond the range covered
by the instructions given in this Instruction Manual is prohibited. We assume no responsibility for accidents caused by
improper repair or adjustment or the use of non-genuine part(s).
2. To protect against personal injury, assure that screws and nuts are properly tightened after the completion of
repair/adjustment works or replacement of the parts.
3. Periodical cleaning of the tool is recommended.
4. In the event that your tool fails to perform satisfactory after repair or adjusting immediately stop the work and contact
HRS for service.
CAUTION
