36
HT130003 / HT130042
HT130030 / HT130043
User Manual
CorTemp
®
Data Recorder v4.3
9001 Series
4.
Check that the wet electrode areas are firmly against your skin and the Polar logo is in
a central, upright position.
NOTE: The Temperature Collection Interval must be set at a minimum of 20 seconds
in order to monitor heart rate.
D. Downloading Data – Sports Menu
D.1. Connecting the Data Recorder to a PC / Laptop
To connect the recorder to a PC / Laptop do the following:
1.
Plug the MF6 connector of the Data Transfer Cable into the Data Port on the recorder.
2.
Connect the DB9 serial connector of the Data Transfer Cable to the appropriate COM
port on the PC / Laptop.
3.
Turn ON the recorder.
4. Press
F1
to initiate
PC LINK
for communication to the CorTrack
®
II Software.
5. Press
RUN / STOP
to terminate
PC LINK.
6.
Unplug the MF6 connector of the Data Transfer Cable from the Data Port on the
recorder.
NOTE:
When removing the MF6 connector from the Data Recorder,
push and hold the locking tab all the way down while removing the MF6
connector.
D.2. Downloading Data to CorTrack
®
II Software
Refer to the
CorTrack
®
II Software User Manual
for downloading instructions.
Locking Tab
ON / OFF Switch
MF6 Connector
