background image

VDL100MLD_v3

  

VELLEMAN® 

2

MINI LINE DANCER 

 

1. Introduction 

 

To all residents of the European Union 
Important environmental information about this product 

This symbol on the device or the package indicates that disposal of the device after its 
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted 
municipal waste; it should be taken to a specialised company for recycling. This device 
should be returned to your distributor or to a local recycling service. Respect the local 
environmental rules. 

If in doubt, contact your local waste disposal authorities. 

 
Thank you for buying the 

VDL100MLD

! It features a built-in microphone for music controlled dynamic 

movement of colourful beams. Please read the manual thoroughly before bringing this device into service. 
Make sure that the device was not damaged in transit. If the device is damaged, you should contact your 
dealer and postpone installation of this device. 
 

2. Safety  Instructions 

 

 

 

 

 

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty 
and the dealer will not accept responsibility for any ensuing defects or problems. 

 

A qualified technician should install and service this device. 

 

Do not switch the device on immediately after it has been exposed to changes in temperature. 
Protect the device against damage by leaving it switched off until it has reached room 
temperature. 

 

This device falls under protection class I. It is therefore essential that the device be earthed. Have 
a qualified person carry out the electric connection. 

 

Make sure that the available voltage does not exceed the voltage stated in the specifications of 
this manual. 

 

Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it 
if necessary. 

 

Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord 
by the plug only. 

 

There may be some smoke or a particular smell when the device is activated for the first time. 
This is normal and any smoke or smell will gradually disappear. 

 

Do not look directly at the light source as sensitive people may go into epileptic seizure if they do. 

 

Note that damage caused by user modifications to the device are not covered by the warranty. 

 

Keep the device away from children and unauthorised users. 

 

3. General  Guidelines 

 

 

This device is designed for professional use on stage, in discos, theatres, etc. The 

VDL100MLD

 

should only be used indoors with an alternating current of max. 230VAC / 50Hz. 

 

Lighting effects are not designed for permanent operation: regular operation breaks will prolong 
their lives. 

 

Do not shake the device. Avoid brute force when installing or operating the device. 

 

Select a location where the device is protected against extreme heat (see “

Technical 

Specifications

”), dust and moisture. Respect a minimum distance of 0.5m between the device’s 

light output and any illuminated surface. 

Be very careful during the installation: touching live wires can cause life-threatening 
electroshocks. 

Do not touch the device during operation as the housing heats up. 

Keep this device away from rain and moisture. 

Unplug the mains lead before opening the housing. 

Summary of Contents for VDL100MLD




















Reviews: