HPRT PPD3, User Manual

Page: 9 / 30

PPD3 User Manual
6
CHAPTER 2 SPECIFICATION
Table 2-1 General Specifications
(1/2)
Items Parameter
Printing
Printing Method Serial impact dot matrix
Head Wire 9-pin serial configuration
Printing Width 63.4mm/57mm/47.5mm
Printing Direction Bidirectional printing (logic seeking)
Printing Speed 4.7 lps (76 mm paper width, 40 columns,1/6”)
Interface
USB
，
Cash Drawer
，
Bluetooth
，
Flexible Interface Board (Serial/Parallel/Ethernet)
Resident Font
Font Size
Font A (5×9)
，
Font B(7×9)
Character Size
1.2(W)×2.42(H), 1.5(W)×2.42(H)mm
Character Set
95 Alphanumeric, 32 International
Code Page
45
Character Per Inch
16.9, 14.1
No.of Columns
42/35
Graphics
Support varied density bitmap as and download bitmap
printing. (Max size of each bitmap is 40K, the total size of
bitmap is 256k)
Line Spacing 1/6 inch standard
Paper
Paper Feed Method Friction feed
Paper Type Ordinary bond and carbonless copy paper
Paper Width
76±0.5mm standard
Adjustable 69.5±0.5mm or 57.5±0.5mm with paper guide
Paper Roll Diameter Up to 85mm
Inner Diameter of the
Roll Paper Core
12±1 mm (Inner dia.), 18±1 mm (Outer dia.)
(Note: Paper rolls with the end of the paper glued or taped to
the paper roll core or paper rolls with the end of the paper
folded can cause a paper jam.)
Paper Thickness 0.065
～
0.085mm
Paper Loading Drop-in method
Copy Capability 2 ply
Thickness: 0.05~0.08 (1 sheet), total thickness must be 0.14
mm or less. Original 1 sheet+one copy sheet
Copy Capability 3 ply
Thickness: 0.05~0.08 (1 sheet), total thickness must be 0.20
mm or less. Original 1 sheet+two copy sheet
，