HPRT PPD3, User Manual

Page: 25 / 30

PPD3 User Manual
22
6.1 Serial Interface
（
RS-232C
）
·DIP switch 1
Switches Functions Turn on Turn off Default
1-1 Line feed automatic Yes Prohibit Turn off
1-2 Handshaking XON/XOFF DTR/DSR Turn off
1-3 Data length 7 bit 8 bit Turn off
1-4 Odd-even verify Yes No Turn off
1-5 Odd-even choice EVEN ODD Turn off
1-6
Choice baud rate
（
bps
）
Reference form 1
Turn off
1-7 Turn on
1-8 Turn off
DIP switch 2
Switches Functions Turn on Turn off Default
2-1
The mode switch in both
Chinese and English
English Chinese Turn on
2-2 Internal control beeper Permit Prohibit Turn off
2-3 Auto cutter Prohibit Permit Turn off
2-4 Busy condition Receive buffer is full
*Off-line
* Receive buffer is full
Turn off
2-5 Print column 42/35 40/33 Turn off
2-6 Serial interface selection Memory switch DIP switch Turn off
2-7 Pin 6 reset signal Used Not used Turn off
2-8 Pin 25 reset signal Used Not used Turn off
6.2 Interfaces of Parallel and USB 2.0
DIP switch 1
Switches Function Turn On Turn Off Default
1-1 Line feed automatic Permit Prohibit Turn off
Auto line feed Enabled Disabled Turn off
Receive buffer capacity 40 bytes 4 KB Turn off
1-4 BUSY condition Receive
buffer full
Receive buffer full or
Offline
Turn off
1-5~1-8 Reserved -- -- --