background image

Instruction Manual

360° PIR Movement Sensor

Cat No. 630R02WE, 630S02WE

This product must be installed by a licensed electrician.

1.     Specifications

Detection method

Passive Infrared (PIR)

Supply voltage

230-240V a.c. 50Hz

Terminal wiring size

1x2.5mm

2

 to 2x1.5mm

2

Standby power

0.6W

Detection/View angle

360°

Detection range (ceiling height 2.5m)

Ø8m

Lux adjustment range

10lux – 1275lux

Time adjustment range

10sec – 10min (approximately)

Switching function

Auto Mode only

Overall dimensions

630R02WE

630S02WE

Cut-out size

Ø65mm

n.a.

Fascia size

Ø78mm

Ø90mm

Depth

50.5mm (overall) 39mm (into ceiling)

52mm

Mounting centres

n.a.

79mm

IP rating

IP41

IP20

Weight

71g

90g

Maximum Lighting Load

Incandescent

1000W (4.3A)

Fluorescent

360W (2.1A)

Extra low voltage halogen

500VA (2.1A)

Compact Fluorescent Lamp (CFL)

250VA (1.1A)

LED

250W (1.1A)

2.5m

4m          2m    1m     0      1m    2m        4m

Ø8m

Fig. 1

1/4

Technical data sheet: S000087115EN-2 

Updated: 18/02/2016 

Created: 09/03/2015

Catalogue number(s): 0 489 41/44/48

Compact motion sensors - PIR

230 V~

1000 W

4.3 A

500 VA

2.1 A

5 x (2x36 W)

2.1 A

250 VA

1.1 A

500 VA

2.1 A

230 V~

5 x (2x36 W)

2.1 A

250 W

1.1 A

250 VA

1.1 A

250 VA

1.1 A

250 W

1.1 A

  1. USE

This device enables a light source to be controlled automatically by 

detecting movement in the monitoring area.  

Using infrared (IR) technology, this motion sensor has a 360° detection 

angle and, when positioned 2.50 m above the ground,  

an 8 m diameter detection area. It is installed on false ceiling (0 489 

41/44 or surface ceiling (0 489 48). It is quick and easy to set, using 

potentiometers. The light level threshold can vary from 10 to 1275 lux 

and the time delay from 10 seconds to 10 minutes.

  2. TECHNICAL FEATURES

Voltage: 240 V~

Frequency: 50/60 Hz

Consumption on standby: 0.75 W

Output via normally open contact connected to the phase

Wiring: 1 x 2.5 mm

2

/2 x 1.5 mm

2

Number of terminals: 3

Type of terminal: screw

Drilling diameter for installation in false ceiling: 65 mm

Weight: 71 g

Impact resistance: IK04

Penetration by solid and liquid matter:    0 489 41/44  IP20 (unmonted)

                 0 489 41/44  IP41 (monted)

                 0 489 48  IP20

Usage temperature: -5°C to +45°C

Storage temperature: -20°C to +70°C

   2.  TECHNICAL FEATURES (continued)

CONTENTS 

Page

1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

2. Technical features   . . . . . . . . . . . . . . . . . . . . . .1

3. Overall dimensions  . . . . . . . . . . . . . . . . . . . . .2

4. Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

5. Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

6. Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

7. Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4

8. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4

9. Standards and approvals . . . . . . . . . . . . . . . .4

1

2

3

4

5

PIR sensor

Time delay 

potentiometer

Light level 

potentiometer 

10 lux
Max: Test mode

1275 lux

1 - Halogen bulbs
2 -  ELV halogen bulbs with separate 

ferromagnetic ballast

3 -  Fluorescent tubes with separate 

ferromagnetic ballast

4 -  Compact fluorescent bulbs with 

separate ferromagnetic ballast

5 -  ELV halogen bulbs with separate 

electronic ballast

6 -  Fluorescent tubes with separate 

electronic ballast

7 -  Compact fluorescent bulbs with 

built-in electronic ballast

8 -  Compact fluorescent bulbs with 

separate electronic ballast

9 -  LED bulbs with separate 

electronic ballast

10 -  LED bulbs with built-in 

electronic ballast

0 489 41/44

0 489 48

10"

10'

2'30"

7'30"

5'

0 489 41/44/48

1/4

Technical data sheet: S000087115EN-2 

Updated: 18/02/2016 

Created: 09/03/2015

Catalogue number(s): 0 489 41/44/48

Compact motion sensors - PIR

230 V~

1000 W

4.3 A

500 VA

2.1 A

5 x (2x36 W)

2.1 A

250 VA

1.1 A

500 VA

2.1 A

230 V~

5 x (2x36 W)

2.1 A

250 W

1.1 A

250 VA

1.1 A

250 VA

1.1 A

250 W

1.1 A

  1. USE

This device enables a light source to be controlled automatically by 

detecting movement in the monitoring area.  

Using infrared (IR) technology, this motion sensor has a 360° detection 

angle and, when positioned 2.50 m above the ground,  

an 8 m diameter detection area. It is installed on false ceiling (0 489 

41/44 or surface ceiling (0 489 48). It is quick and easy to set, using 

potentiometers. The light level threshold can vary from 10 to 1275 lux 

and the time delay from 10 seconds to 10 minutes.

  2. TECHNICAL FEATURES

Voltage: 240 V~

Frequency: 50/60 Hz

Consumption on standby: 0.75 W

Output via normally open contact connected to the phase

Wiring: 1 x 2.5 mm

2

/2 x 1.5 mm

2

Number of terminals: 3

Type of terminal: screw

Drilling diameter for installation in false ceiling: 65 mm

Weight: 71 g

Impact resistance: IK04

Penetration by solid and liquid matter:    0 489 41/44  IP20 (unmonted)

                 0 489 41/44  IP41 (monted)

                 0 489 48  IP20

Usage temperature: -5°C to +45°C

Storage temperature: -20°C to +70°C

   2.  TECHNICAL FEATURES (continued)

CONTENTS 

Page

1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

2. Technical features   . . . . . . . . . . . . . . . . . . . . . .1

3. Overall dimensions  . . . . . . . . . . . . . . . . . . . . .2

4. Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

5. Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

6. Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

7. Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4

8. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4

9. Standards and approvals . . . . . . . . . . . . . . . .4

1

2

3

4

5

PIR sensor

Time delay 

potentiometer

Light level 

potentiometer 

10 lux
Max: Test mode

1275 lux

1 - Halogen bulbs
2 -  ELV halogen bulbs with separate 

ferromagnetic ballast

3 -  Fluorescent tubes with separate 

ferromagnetic ballast

4 -  Compact fluorescent bulbs with 

separate ferromagnetic ballast

5 -  ELV halogen bulbs with separate 

electronic ballast

6 -  Fluorescent tubes with separate 

electronic ballast

7 -  Compact fluorescent bulbs with 

built-in electronic ballast

8 -  Compact fluorescent bulbs with 

separate electronic ballast

9 -  LED bulbs with separate 

electronic ballast

10 -  LED bulbs with built-in 

electronic ballast

0 489 41/44

0 489 48

10"

10'

2'30"

7'30"

5'

0 489 41/44/48

630R02WE

630S02WE

Reviews: