background image

20

881629-001 

 

6. Technical specifications

6.1 NA/JP technical specifications

Tower

HPE T750 G5 NA/JP Tower

HPE T1000 G5 NA/JP Tower

HPE T1500 G5 NA/JP Tower

Output power @ 120 V

750 VA

600 W

1000 VA

770 W

1440 VA 

1100 W

Output power @ 125 V

750 VA

600 W

1000 VA

770 W

1440 VA 

1100 W

Output power @ 100 V

625 VA

500 W

833 VA

641 W

1080 VA 

825 W

AC input power

•  Rated input voltage

Single phase 100–125 V

•  Input voltage range

80 to 162 V

 

(1)

•  Input frequency range

47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system)

 

(2)

Output on battery power

• Voltage

100/120 V (-10%/+6%) 

(3)

• Frequency

50/60 Hz ±0.1 Hz

Battery (sealed lead-acid, maintenance free)

• Standard

2 x 12 V 

7 Ah

2 x 12 V

9 Ah

3 x 12 V

9 Ah

Environment

•  Operating

temperature range

0°C to 35°C 

(32°F to 95°F)

0°C to 40°C 

(32°F to 104°F)

•  Storage

temperature range

-15°C to +50°C

(5°F to 122°F)

•  Relative humidity

20% to 90% (without condensation)

• Noise level

<40 dBA

(1) 

The high and low thresholds can be adjusted using UPS settings.

(2)

 Up to 40 Hz in Low-Sensitivity mode (programmable using UPS settings).

(3)  

Adjustable to 100/120/125 V, must be set to the identical AC power source value.

CAUTION: 

To reduce the risk of 

fi

 re, connect only to a circuit provided with 20 amperes maximum branch 

circuit overcurrent protection in accordance with the NEC (National Electric Code), ANSI/NFPA 70.

This product is designed for IT power distribution systems.

Filter

Transformer 
"AVR"

Charger

Inverter

Battery

Summary of Contents for T1000 G5 NA/JP Tower


























Reviews: