Removal and replacement procedures 19
5.
Open the drive drawer by pressing the drive drawer handle release latch and pulling the drive drawer
handle until the drawer is fully extended.
6.
Label the drive bay locations for each drive.
7.
Remove all of the drives and I/O adapters.
8.
Close the drive drawer until it clicks in the closed position, and then close the drive drawer handle.
9.
Remove the D3940 Storage Module by pressing the storage module handle release latch and pulling
the storage module out with the storage module handle.
10.
Place the D3940 storage module on a flat, level work surface.
Installing the Synergy D3940 storage module enclosure
1.
Install the replacement storage module by sliding it into the frame. Push the storage module handle
to the closed position until it clicks into place.
NOTE:
The storage module handle arrives packaged in the closed position and must be
opened prior to inserting into the frame.