Chapter 4: Server troubleshooting
25
Power supply monitoring
The LED on the front of each power supply indicates the status of the power supply and when there is a problem,
such as a failed power supply. You can also view power supply status in your hypervisor manager. If a power
supply fails, contact
Customer Support (support.hpe.com)
for a replacement of the same type and wattage.
Each power supply has a status LED that indicates whether power is present or whether a power fault has
occurred. The status LED is located to the left of the red latch lever.
LED State
Description
Off
System off or power supply failed
Steady green
Normal operation
Network interface monitoring
Each server provides a two-port 1 GbE and a two-port 10 GbE interface used for network communication.
NOTE:
This example shows the interface locations for server 3 (in a chassis with 3 nodes) only, for ease of viewing.
All servers have identical interface locations. Optional NICs for guest VM networks may be installed in the HPE
SimpliVity 190 Gen10 system.
