HPE SimpliVity 2600 Gen10, Installation And Maintenance Manual

Page: 23 / 37

Chapter 4: Server troubleshooting 23
Callout Function LED State
Flashing red System critical
Off No power is present
Steady green The server powered up
Flashing green Performing power up sequence
2 Power (for each
server)
Solid amber System in standby mode
Solid blue Activated
Flashing blue One flash per second: Remote management or firmware
upgrade in progress
Four flashes per second: ILO manual reboot initiated
Eight flashes per second: ILO manual reboot in progress
3 UID button
Off Deactivated
Drive monitoring
The LEDs on the front of each drive indicate when a drive has failed or is failing. If a drive fails, contact Customer
Support (support.hpe.com) to obtain a replacement drive of the same type, size, and speed.
The drives in the front panel store user and federation data and are protected by RAID 1+0 and RAID 5.
Callout Function LED State
Solid blue The drive generated an alarm. 1 Locate
Flashing
blue
The drive carrier firmware is being updated or requires an update.
Solid green The drive is a member of one or more logical drives. 2 Drive status
Flashing
green
The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is erasing.