Removal and replacement procedures 44
6.
Remove the FlexibleLOM.
To replace the component, reverse the removal procedure.
Accelerator
To remove the component:
1.
Power down the server (on page
2.
Disconnect all peripheral cables and power cords from the rear panel.
3.
Remove the server (on page
4.
Remove the access panel (on page
CAUTION:
To avoid damage to the accelerator, do not touch the edge where the accelerator
aligns with the water wall.
5.
Remove the Intel Xeon Phi 7120D coprocessor accelerator.
To replace the component, reverse the removal procedure.
Accelerator riser board
1.
Power down the server (on page
2.
Disconnect all peripheral cables from the server.
