Removal and replacement procedures 43
7.
Remove the I/O slot card from the I/O bracket.
To replace the component, reverse the removal procedure.
FlexibleLOM
IMPORTANT:
If the drive cage is installed, you cannot install the HPE InfiniBand 544
FlexibleLOM adapter in the server due to physical interference between the two parts.
IMPORTANT:
When removing the FlexibleLOM adapter out of the server, turn it slightly to
avoid contact with other server components.
To remove the component:
1.
Power down the server (on page
2.
Disconnect all peripheral cables and power cords from the rear panel.
3.
Remove the server (on page
4.
Remove the access panel (on page
5.
Disconnect the FlexibleLOM cable ("
