Procedure
1.
Install the air baffle.
2.
Install the primary PCIe riser cage (
Installing the primary PCIe riser cage
on page 38).
3.
Install the butterfly PCIe riser cage (
Installing a butterfly PCIe riser cage
4.
on page 37).
5.
Install the server into the rack (
Installing the server into the rack
on page 53).
6.
Connect each power cord to the server.
7.
Connect each power cord to the power source.
on page 32.
Removing the fan cage
Procedure
on page 32.
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extending the server from the rack
on page 32).
• Remove the server from the rack (
Removing the server from the rack
on page 33).
4.
Remove the access panel (
on page 36).
42
Removing the fan cage
