Figure 2: Front of server
1.
Server top/pedestal right
2.
Server left/pedestal top
3.
Server bottom/pedestal left
4.
Server right/pedestal bottom
The pedestal kit bottom attaches to the right side of the server when the server is in the horizontal
position. The pedestal kit top attaches to the left side of the server when in the server is in the horizontal
position. The pedestal bottom can be distinguished from the pedestal top by the pedestal feet slots.
Procedure
NOTE:
The bottom piece of the pedestal is taller than the server, so try to position the server so the right
side (in the horizontal position) of the server hangs off the edge of the work surface by a few inches
to allow the bottom piece to be attached to the server chassis. If that is not possible, then raise up
the server approximately three inches from the work surface to enable the pedestal kit bottom piece
to be attached to the server right side.
Installing the server
7
