Procedure
1.
Slightly pull the rail lock away from the rail to unlock the rail. See
Removing the rails from the server
2.
Slide the rail toward the front of the server to disengage the rail from the posts on the server.
3.
Repeat these steps for the rail on the other side of the server.
Figure 1: Removing the rails from the server
Attaching the pedestal kit top and bottom
IMPORTANT:
In this document the server top, bottom, right and left refer to the server as faced from the front with
the server in a horizontal orientation. The pedestal kit components are referred to by the final
position with the server in a vertical orientation. For example, the pedestal kit bottom attaches to the
server right side
6
Attaching the pedestal kit top and bottom
