manualshive.com logo in svg

HPE FlexFabric 5710 Series, Installation Manual

Share
Download
HPE FlexFabric 5710 Series Installation Manual Download Page 61

 

57 

Table 32 QSFP+ port LED description 

LED status 

Description 

Steady green 

A transceiver module or cable has been correctly installed. The port has a link and 
is operating at 40 Gbps.  

Flashing green 

The port is sending or receiving data at 40 Gbps.  

Steady yellow 

A transceiver module or cable has been correctly installed. The port has a link and 
is operating at 10 Gbps.  

Flashing yellow (3 Hz) 

The port is sending or receiving data at 10 Gbps. 

Off 

No transceiver module or cable has been installed or no link is present on the port.

 

QSFP28 port LED 

Each QSFP28 port has a status LED to show its operating status and activities.  

Table 33 QSFP28 port LED description 

LED status 

Description 

Steady green 

A transceiver module or cable has been correctly installed. The port has a link and 
is operating at 100 Gbps.  

Flashing green 

The port is sending or receiving data at 100 Gbps.  

Steady yellow 

A transceiver module or cable has been correctly installed. The port has a link and 
is operating at 10/40 Gbps.  

Flashing yellow (3 Hz) 

The port is sending or receiving data at 10/40 Gbps. 

Off 

No transceiver module or cable has been installed or no link is present on the port.

 

Management Ethernet port LEDs 

The switch provides a LINK/ACT LED for each management Ethernet port. For LED description for 
the copper management Ethernet port, see 

Table 34

. For LED description for the fiber management 

Ethernet port, see 

Table 35

. 

Table 34 Copper management Ethernet port LED description 

LED mark 

Status 

Description 

LINK/ACT 

Steady green 

The port is operating at 10/100/1000 Mbps and a link is present.

Flashing green

The port is receiving or sending data. 

Off 

No link is present. 

 

Table 35 Fiber management Ethernet port LED description 

LED mark 

Status 

Description 

LINK/ACT 

Off 

No link is present. 

Steady green 

The port is operating at 100/1000 Mbps and a link is present. 

Flashing green

The port is receiving or sending data. 

 

Summary of Contents for FlexFabric 5710 Series






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands