8
•
To secure the switch to the rack, you must install not only mounting brackets, but also chassis
rails and slide rails.
Table 6 Distance requirements between the front and rear rack posts
Switch model
Installation method
Minimum distance
between the front and
rear rack posts
Maximum distance
between the front
and rear rack posts
•
HPE
5710-54HF
•
HPE
5710-30HF
Using mounting
brackets, chassis rails,
and long slide rails
621 mm (24.45 in)
793 mm (31.22 in)
•
HPE
5710-54HT
•
HPE
5710-30HT
Using mounting
brackets, chassis rails,
and long slide rails
621 mm (24.45 in)
854 mm (33.62 in)
Attaching the mounting brackets, chassis rails, and
grounding cable to the chassis
The switch has two mounting bracket installation positions on its two sides: one near the network
port side and one near the power supply side.
The switch provides a primary grounding point (with a grounding sign) and an auxiliary grounding
point.
Figure 5 Mounting bracket installation positions and grounding positions on the HPE
5710-54HF and HPE 5710-30HF switches
(1) Mounting bracket installation position near the power supply side
(2) Primary grounding point
(3) Auxiliary grounding point
(4) Mounting bracket installation position near the port side
