72
track-entry-number
:
Specifies a track entry. The
track-entry-number
argument is in the range of 1 to
1024.
reduced
priority-reduced
:
Reduces the priority of the router in the VRRP group by a specific value
when the state of the specified track entry changes to negative. The
priority-reduced
argument is in
the range of 1 to 255.
switchover
: Enables the router in backup state to take over as the master immediately after the
specified track entry changes to the negative state
.
Usage guidelines
When the associated track entry changes to the negative state, the priority of the router in the VRRP
group decreases by a specified value, or the router immediately takes over as the master if it is a
backup, depending on your configuration.
If neither
reduced
priority-reduced
nor
switchover
is specified, the priority of the router in the VRRP
group decreases by 10 when the track entry changes to
negative
.
When the track entry changes from Negative to Positive or NotReady, the router automatically
restores its priority.
IMPORTANT:
•
The
vrrp vrid
track
command cannot take effect on an IP address owner. If you have configured
the command on an IP address owner, the configuration takes effect after the router changes to
be a non IP address owner.
•
You can create a track entry with the
track
command before or after you associate it with a
VRRP group. For more information about configuring track entries, see
High Availability
Configuration Guide
.
Examples
# Associate VRRP group 1 on VLAN-interface 2 with track entry 1 and decrease the priority of the
router in the VRRP group by 50 when the state of track entry 1 changes to negative.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 track 1 reduced 50
Related commands
display
vrrp
vrrp vrid
Use
vrrp
vrid
to create an IPv4 VRRP group and assign a virtual IP address to the IPv4 VRRP group
or assign a virtual IP address to an existing IPv4 VRRP group.
Use
undo
vrrp vrid
to remove all configurations of an existing IPv4 VRRP group or to remove a
virtual IP address from an existing IPv4 VRRP group.
Syntax
vrrp vrid
virtual-router-id
virtual-ip
virtual-address
undo vrrp vrid
virtual-router-id
[
virtual-ip
[
virtual-address
] ]
Default
No IPv4 VRRP group is created.
Views
Interface view
