10.
Attach the cables to the power supply handle with the hook-and-loop strap.
11.
Route the power cord. Use best practices when routing power cords and other cables. A cable
management arm is available to help with routing. To obtain a cable management arm, contact a
Hewlett Packard Enterprise authorized reseller.
12.
Make sure the -48V DC power source is off or the PDU breaker is in the off position, and then
connect the power cord to the -48V DC power source or PDU.
13.
Turn on the -48V power source or switch the PDU breaker to the on position to supply -48V to the
power supply.
14.
Be sure that the green power supply LED is on.
Install a power supply blank
Procedure
1.
Align the power supply blank to the unused power supply bay on the system, and insert until it locks in
place.
18
Install a power supply blank
