9
Control Panel Features
Item
Feature
Description
1
Information LED
See table on the following page.
2
NIC2 LED
Indicates network activity on the LAN2 port when flashin
3
NIC1 LED
Indicates network activity on the LAN1 port when flashin
4
HDD LED
Indicates activity on the hard drive when flashin
5
Power LED
Indicates power is being supplied to the system power supply units. This LED
should normally be illuminated when the system is operating.
6
UID LED
The unit identification (UID) button turns on or off the blue light function of the
Information LED and the blue LED on the rear of the chassis. These are used to
locate the server in large racks and server banks.
7
Power Button
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing
Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below.
1
7
6
5
4
3
2
1.3 System Features
For a complete list of system features, please refer to the HPE Apollo pc40 QuickSpecs
at:
www.hpe.com/servers/apollo-pc40
