IMPORTANT:
The left and right sides of the chassis are oriented 180° from each other. Components
that are installed on one side of the chassis must be turned 180° when they are installed on the
opposite side.
4.
Install the I/O module into the bay that corresponds to the server bay. For more information, see
I/O
module bay numbering
on page 13.
5.
If not installed, install the dual-rotor fan module (
Installing the rear chassis fan modules
on page 29).
Installing data switch options
The chassis supports installation of the following data switches:
• 10GbE Integrated Switch
• HPE Apollo Ethernet 10GbE Pass-Thru Module
32
Installing data switch options