HPE Apollo 4530, Maintenance And Service Manual

Page: 35 / 82

Removing and replacing the I/O module
Procedure
1. Power down the servers .
2. Open the cable management arm .
3. Disconnect any cables connected to the I/O module.
4. Remove the I/O module.
To replace the component, reverse the removal procedure.
Removing and replacing the expansion board
This server supports both PCIe expansion boards and a FlexibleLOM in the I/O module.
Procedure
1. Power down the servers .
2. Open the cable management arm .
3. Disconnect any cables connected to the I/O module.
4. Remove the I/O module .
5. Remove the I/O module access panel.
Removing and replacing the I/O module 35