HPE Apollo 4530, Maintenance And Service Manual

Page: 40 / 82

3. Extend the chassis from the rack .
4. Remove the access panel .
5. Release the drive backplane.
6. Remove the drive backplane.
To replace the component, reverse the removal procedure.
Removing and replacing the Discovery services cable
Procedure
1. Power down the server on page 23.
2. Disconnect the cable management arm on page 28.
3. Disconnect all cables from the rear of the chassis.
4. Remove the access panel on page 26.
5. Remove all power supplies ( Removing and replacing a power supply on page 32).
6. Remove all I/O modules ( Removing and replacing the I/O module on page 35).
7. Remove all system fans ( Removing and replacing the system fan on page 36).
40 Removing and replacing the Discovery services cable