2 Setting the contrast and the brightness
The display settings for contrast and brightness are set to the highest possible values by default.
Change the settings if adverse lighting conditions make it difficult to read the displayed information.
Optimising the contrast settings:
■ Press and hold the «Information» key.
■ At the same time, press the «Left» or «Right» key.
Optimising the brightness settings:
■ Press and hold the «Information» key.
■ At the same time, press the «UP» or «DOWN» key.
Precondition The display shows the operating mode.
1. Press «Enter».
The main menu is displayed.
2. Press and hold the «Information» key.
6 . 1 b a r 0 8 : 1 5 8 0 . 0 ° C
Main menu
········· Deutsch ·········
Active line with current language
▶1 xxxxxxxxxx
Submenu
▶2 xxxxxxxxxx
Submenu
▶3 xxxxxxxxxx
Submenu
▶4 xxxxxxxxxx
Submenu
▶5 xxxxxxxxxx
Submenu
3. Press «UP» or «DOWN» to adjust the contrast.
4. Press «Left» or «Right» to adjust the brightness.
Result The settings for contrast and brightness have been adjusted.
2
Setting the contrast and the brightness
2
Quick User Guide Controller
SIGMA CONTROL 2 SCREW FLUID ≥1.1.3
9_9450 03 HCE
