HPA-Faip M 824, Operator'S Manual

Page: 25 / 37

62 Operator's manual M 824
INFORMATION
REGARDING
MACHINE
DEMOLITION
If the machine is to be scrapped, remove
all electrical, electronic, plastic and metal
parts.
and dispose of them separately in accord-
ance with current provisions as prescribed
by law.
ENVIRONMENTAL
INFORMATION
The disposal procedure described below
only applies to machines with the sym-
bol of the waste bin with a bar across it
on their data plates.
This product may contain substances that
can be hazardous to the environment
and to human health if it is not disposed
of properly.
The following information is therefore
provided to prevent the release of these
substances and to improve the use of
natural resources.
Electrical and electronic equipment must
never be disposed of in the usual mu-
nicipal waste but must be separately col-
lected for their proper treatment.
The crossed-out bin symbol, placed on
the product and on this page, reminds the
user that the product must be disposed of
properly at the end of its life.
In this way it is possible to prevent that a
non specific treatment of the substances
contained in these products, or their im-
proper use, or improper use of their parts
may be hazardous to the environment or
to human health. Furthermore, this helps
to recover, recycle and reuse many of the
materials contained in these products.
Electrical and electronic manufacturers
and distributors set up proper collection
and treatment systems for these products
for this purpose.
Contact your local distributor to obtain
information on the collection procedures
at the end of the life of your product.
When purchasing this product, your dis-
tributor will also inform you of the pos-
sibility to return another end-of-life piece
of equipment free of charge as long as it
is of equivalent type and had the same
functions as the purchased product.
Any disposal of the product performed in
a different way from that described above
will be liable to the penalties provided for
by the national regulations in force in the
country where the product is disposed of.
Further measures for environmental pro-
tection are recommended: recycling of
the internal and external packaging of
the product and proper disposal of used
batteries (only if contained in the product).
Your help is crucial in reducing the amount
of natural resources used for manufactur-
ing electrical and electronic equipment,
minimise the use of landfills for prod-
uct disposal and improve the quality of
life, preventing potentially hazardous
substances from being released in the
environment.