manualshive.com logo in svg

HP zd7005QV - Pavilion - Pentium 4 2.66 GHz, Startup And Reference Manual

Share
Download
HP zd7005QV - Pavilion - Pentium 4 2.66 GHz Startup And Reference Manual Download Page 77

Power

Startup and Reference Guide—Part 2

4–25

Battery Conservation Settings

Using the following battery conservation settings and procedures 
extends the run time of a battery pack.

■

Turn off wireless and local area network (LAN) connections 
and exit modem applications when you are not using them.

■

Disconnect from the notebook any external devices that use 
power from the notebook. Battery run time is not affected by 
external devices that are plugged into an external power 
source.

■

Stop or remove a PC Card you are not using. For more 
information, refer to the “Using a PC Card” section in 
Chapter 8.

■

Disable or remove a Digital Media card (SD, MMC, Memory 
Stick, or SmartMedia) you are not using.

■

Lower screen brightness.

■

Lower system volume.

■

Turn off a device connected to the S-Video jack.

■

If you leave your work, initiate Standby or Hibernation or 
shut down the notebook.

■

Select a short wait time, 5 minutes or less, for the monitor 
timeout. To change monitor timeout settings, select Start > 
Control Panel > Performance and Maintenance icon > Power 
Options icon > Power Meter tab. Select a short wait time 
from the Turn Off Monitor drop-down list, then select OK.

Ryan Masterfile.book  Page 25  Monday, June 9, 2003  2:33 PM

Summary of Contents for zd7005QV - Pavilion - Pentium 4 2.66 GHz













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands