manualshive.com logo in svg

HP zd7005QV - Pavilion - Pentium 4 2.66 GHz, Startup And Reference Manual

Share
Download
HP zd7005QV - Pavilion - Pentium 4 2.66 GHz Startup And Reference Manual Download Page 63

Power

Startup and Reference Guide—Part 2

4–11

Initiating or Resuming from Standby

Task

Procedure

Result

Initiate Standby

With the notebook on, use 
either of the following 
procedures:

■

Press the 

fn+f5

 hotkey.

■

Select Start > Turn off 
Computer > Stand by.

■

The power/standby light 
flashes.

■

The screen clears.

Allow the system 
to initiate 
standby

■

If the notebook is running 
on battery power, the 
system initiates standby 
after 10 minutes of 
notebook inactivity (default 
setting).

■

If the notebook is running 
on external power, the 
system does not initiate 
standby.

■

Power settings and 
timeouts can be changed 
in the Power Options 
window.

■

The power/standby light 
flashes.

■

The screen clears.

Resume from 
user-initiated or 
system-initiated 
Standby.

■

Press the power button.

■

The power/standby light 
turns on.

■

Your work returns to the 
screen.

Ryan Masterfile.book  Page 11  Monday, June 9, 2003  2:33 PM

Summary of Contents for zd7005QV - Pavilion - Pentium 4 2.66 GHz













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands