manualshive.com logo in svg

HP zd7005QV - Pavilion - Pentium 4 2.66 GHz, Startup And Reference Manual

Share
Download
HP zd7005QV - Pavilion - Pentium 4 2.66 GHz Startup And Reference Manual Download Page 61

Power

Startup and Reference Guide—Part 2

4–9

Turning the Notebook or Display On or Off

Task

Procedure

Results

Turn on the 
notebook.

Press the power button.

✎

Pressing the 
power button 
turns on the 
notebook from 
Standby, 
Hibernation, or 
shutdown.

■

The power/standby light 
turns on.

■

The operating system 
loads.

Shut down the 
notebook.*

Save your work and close 
all open applications. 
Then:

■

Press the power button 
and follow the 
onscreen instructions 
(if displayed) for 
shutting down the 
notebook.

■

Shutdown the 
notebook through the 
operating system. 
Select Start > Turn Off 
Computer > Turn Off.

■

The power/standby light 
turns off.

■

The operating system 
shuts down.

■

The notebook turns off.

*If the system is unresponsive, and you are unable to shut down the notebook 
with this procedure, refer to the next section, 

“Using Emergency Shutdown 

Procedures.”

Ryan Masterfile.book  Page 9  Monday, June 9, 2003  2:33 PM

Summary of Contents for zd7005QV - Pavilion - Pentium 4 2.66 GHz













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands