manualshive.com logo in svg

HP Z238, Maintenance And Service Manual

Share
Download
HP Z238 Maintenance And Service Manual Download Page 29

Table 2-3

  Computer Setup—Advanced (for advanced users) (continued)

●

SATA3

●

Front USB ports

If not selected, individual ports cannot be enabled.

●

Rear USB ports

If not selected, individual ports cannot be enabled.

●

USB charging port function

●

Media card reader

Restrict USB Devices

Specify the following categories of USB devices to enable:

●

Allow all USB devices

●

Allow only keyboard and mouse

●

Allow all but storage devices and hubs.

When some devices are restricted, the system will disable USB ports that do not meet the allowed 
criteria. This feature is usually combined with similar policies within the operating system since USB 
devices can be moved to different ports. The ports disabled by the BIOS will remain disabled until the 
system is restarted.

Option ROM Launch 
Policy

These policies control whether Legacy Option ROMs or UEFI drivers are loaded. Default is ‘All legacy’ for 
Windows 7 and non-Windows configurations. Default is ‘All UEFI’ for Windows 10.

Configure Option ROM Launch Policy

●

All legacy

●

All UEFI

●

All UEFI except video

Slot settings

Lets you enable or disable any PCIe slot.

Power Management 
Options

Runtime Power Management (enable/disable)

Allows certain operating systems to reduce processor voltage and frequency when the current software 
load does not require the full capabilities of the processor. Default is enabled.

Extended Idle Power States (enable/disable)

Allows certain operating systems to decrease the processors power consumption when the processor is 
idle. Default is enabled.

S5 Maximum Power Savings (enable/disable)

Enabling this feature reduces the power of the system as much as possible in the S5 state. Power is 
removed from the wake up circuitry, the expansion slots, and any management features while in S5. 
Default is disabled.

SATA Power Management (enable/disable)

Enables or disables SATA bus and/or device power management. Default is enabled.

Unique Sleep State Blink Rates (enable/disable)

This feature is designed to provide a visual indication of what sleep state the system is in. Each sleep 
state has a unique blink pattern. Default is disabled.

NOTE:

A normal shutdown goes to the S4 state for Windows 10.

S0 (On) = Solid white LED.

Computer Setup (F10) utilities

21

Summary of Contents for Z238




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands