System Board
System Board Form Factor
ATX 251.46 x 304.8 mm (9.9 x 12 inches)
Processor Socket
Single LGA 1156
CPU Bus Speed
DMI
Chipset
Intel® PCH 3450
Super I/O Controller
SMSC SCH5327, Rev B
Memory Expansion Slots
4 DDR3 memory slots
Memory Type Supported
DDR3, UDIMM (Unbuffered), ECC& nECC
Memory Modes
Channel non-Interleaved
Memory Speed Supported
1333MHz DDR3
Memory Protection
ECC available on data, parity on address and command
Memory
Maximum Memory
16GB
Memory Configuration
(Supported)
ECC DIMMs are supported, and support nEcc 1GBx1 configuration on Z200
PCI Express Connectors
1 PCI Express Gen2 slots x16 mechanical/ x16 electrical (used for discrete graphics)
1 PCI Express Gen1 slot x16 mechanical/x4 electrical
1 PCI Express Gen1 slot x4 mechanical/x1 electrical
1 PCI Express Gen1 slot x1 mechanical/x1 electrical
PCI Connectors
(5.0V)
3 PCI
Supported Drive
Interfaces
SATA
Integrated 6-channel SATA 3.0Gb/sec controller with RAID 0, 1,
5 and NCQ. (Factory integrated RAID is Microsoft Windows only)
RAID 5 is supported by Software XOR.
Serial Attached SCSI
None
Integrated RAID
NOTE:
Requires identical hard drives (speeds, capacity, interface)
QuickSpecs
HP Z200 Workstation
System Technical Specifications
DA - 13541 Worldwide — Version 20 — September 1, 2011
Page 13
