5.
Insert the hooks on the back end of the PCI retainer into the slots on the back of the chassis (1) and lock
the retainer in place by rotating it down into position (2).
NOTE:
The PCI retainer locks the PCI retention clamp in place.
Installing multiple HP Z Turbo Drives or HP Z Turbo Quad Pro
Drives
Configuring the drive addresses
If more than one of any of the following drives are to be installed in a system, a unique address for each drive
must be configured before installation:
●
HP Z Turbo Drive
●
HP Z Turbo Drive G2
●
HP Z Turbo Quad Pro
NOTE:
A second HP Z Turbo Quad Pro can be installed on an HP Z840 with a second CPU only.
The HP Z Turbo Drive and HP Z Turbo Drive G2 both support a single M.2 module and have jumpers that can be
set to eight unique addresses. Each HP Z Turbo Drive and HP Z Turbo Drive G2 must have a unique address.
For possible jumper configurations and corresponding labels, see the following diagram.
14
HP Z Turbo Drive Quad Pro installation
