2.
Connect the power (1) and data (2) cables to the primary (upper) ports on the unit.
Figure 30
Power and data ports
3.
Connect the opposite end of the data cable to the appropriate connector on the system board or
controller card.
●
Connect SATA drives to SATA ports, and SAS drives to SAS ports, starting with the lowest-
numbered available port.
●
For HP Z400 and Z600 computers, the blind-mate cables for the internal hard drive bays
may require adjustment at the system board, based on the computer drive configuration.
Consult the
User Guide
or the
Maintenance and Service Guide
for your computer for
additional information.
4.
To prepare your installed hard drive for operation, see the appropriate hard drive documentation.
5.
Replace the computer bezel and bezel security screw, if applicable.
6.
Reinstall the card support, if applicable.
7.
Reinstall the airflow guide, if applicable.
8.
Reinstall the side access panel.
9.
Reconnect all external devices.
10.
Restore power to the computer and all external devices.
Japanese
日本語
This document is available in Japanese. See
http://www.hp.com/support/manuals
, then select your
product and select
Japanese
from the drop down
Manual Language
menu.
このドキュメントは日本語版が用意されています。
http://www.hp.com/support/manuals
にアクセ
スし、ご使用のワークステーション製品を選択し、
Manual Language
ドロップダウン
メニューか
ら
Japanese
を選択してください。
18
CRU Dataport DX115 kit installation
ENWW
