Audio board
Description
Spare part number
Audio board
902368-001
Audio board bracket
902361-001
Audio board cable
902351-001
Before removing the audio board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the LCD shield (see
).
6.
Remove the battery (see
).
Remove the audio board:
1.
Release the ZIF connector (1) to which the audio board cable is attached, and then disconnect the audio
jack board cable from the audio board.
2.
Remove the Phillips PM2.0×2.0 screw (2) that secures the audio board bracket to the display assembly.
3.
Lift the bracket out of the display panel assembly (3).
4.
Remove the audio board (4) and cable.
Reverse this procedure to install the audio board.
32
Chapter 5 Removal and replacement procedures
Summary of Contents for X2 210 G2
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...