TouchPad board
Description
Spare part number
TouchPad board for use in silver models
902373-001
TouchPad board for use in white models
907508-001
TouchPad board for use in red models
907509-001
TouchPad board cable (for use in HP x2 and HP x2 210 G2 models without a hard drive)
902357-001
TouchPad board cable (for use in HP x2 models with a hard drive)
902358-001
Before removing the TouchPad board, follow this step:
▲
Remove the bottom cover (see
Remove the TouchPad board:
1.
Disconnect the cable from the TouchPad (1).
2.
Remove the three black Phillips PM2.0×2.0 screws (2).
3.
Lift the bracket off the board (3).
4.
Remove the three broadhead silver Phillips PM2.0×2.0 screws (4).
5.
Remove TouchPad board from the dock (5).
Reverse this procedure to install the TouchPad board.
46
Chapter 5 Removal and replacement procedures
Summary of Contents for X2 210 G2
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...