HP X2 210 G2 Maintenance And Service Manual Download Page 36

Page: 36 / 78

LCD shield

Description

Spare part number

LCD shield (includes thermal pad)

902363-001

Before removing the LCD shield, follow these steps:

Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.

Disconnect the power from the tablet by unplugging the power cord from the tablet.

Disconnect all external devices from the tablet.

Remove the back cover (see

Back cover on page 22

Remove the LCD shield:

Peel the antenna off the shield (1).

Remove the 10 Phillips PM2.0×2.5 screws (2) that secure the shield to the display.

Lift the shield from the display panel assembly (3).

Reverse this procedure to install the LCD shield.

Chapter 5 Removal and replacement procedures

Summary of Contents for X2 210 G2















































































Search results

Summary of Contents for X2 210 G2

Reviews:

Related manuals for X2 210 G2

Brands by name

Popular brands

HP X2 210 G2, Maintenance And Service Manual

Search results

Summary of Contents for X2 210 G2

Reviews:

Related manuals for X2 210 G2

Brands by name

Popular brands