HP X131 10G X2 SC LRM, Quickspecs

Page: 3 / 6

HP X131 10G X2 SC LR
HP X131 10G X2 SC LR HP X131 10G X2 SC LR
HP X131 10G X2 SC LR
Transceiver
Transceiver Transceiver Transceiver (J8437A)
An X2 form-factor
transceiver that supports
the 10-Gigabit LR
standard, providing 10-
Gigabit connectivity up to
10 km on single-mode
fiber.
Ports
Ports Ports
Ports 1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR); Duplex: full only
Connectivity Connectivity Connectivity Connectivity Connector type Connector type Connector type Connector type SC
Wavelength Wavelength Wavelength Wavelength 1310 nm
Physical characteristics Physical characteristics Physical characteristics Physical characteristics Dimensions Dimensions Dimensions Dimensions 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
1.09 cm)
Weight Weight Weight Weight 0.35 lb. (0.16 kg)
Transceiver form factor Transceiver form factor Transceiver form factor Transceiver form factor X2
Environment Environment Environment Environment Operating temperature Operating temperature Operating temperature Operating temperature 32ºF to 104ºF (0ºC to 40ºC)
Operating relative Operating relative Operating relative Operating relative
humidity
humidity humidity humidity
15% to 95%, noncondensing
Nonoperating/Storage Nonoperating/Storage Nonoperating/Storage Nonoperating/Storage
temperature
temperature temperature temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Altitude Altitude Altitude Altitude up to 10,000 ft. (3 km)
Electrical characteristics Electrical characteristics Electrical characteristics Electrical characteristics Power consumption Power consumption Power consumption Power consumption
typical
typical typical typical
2 W
Power consumption Power consumption Power consumption Power consumption
maximum
maximum maximum maximum
3 W
Cabling Cabling Cabling Cabling Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652
and ISO/IEC 793-2 Type B1;
Maximum distance:
10 km
Cable length Cable length Cable length Cable length 2m to 10km with 9/125 ìm single-mode cable
Fiber type Fiber type Fiber type Fiber type Single Mode
Notes Notes Notes Notes Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended
Services Services Services Services Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4) HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4) HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4) HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
DA - 12987 Worldwide — Version 7 — April 14, 2011 Page 3