330
Step Command
Remarks
4.
Set the DF bit in the
IP header.
apply ip-df
df-value
By default, the DF bit in the IP header is not set.
5.
Set VPN instances.
apply access-vpn vpn-instance
vpn-instance-name
&<1-
n
>
By default, no VPN instance is specified.
You can specify up to six VPN instances for a
node. The matching packets are forwarded
according to the forwarding table of the first
available VPN instance.
6.
Set next hops.
apply next-hop
[
vpn-instance
vpn-instance-name
|
inbound-vpn
] {
ip-address
[
direct
] [
track
track-entry-number
] }&<1-
n
>
By default, no next hop is specified.
You can specify multiple next hops for backup
or load sharing by executing this command
once or multiple times.
You can specify up to 16 next hops for a node.
7.
Enable load
sharing among
multiple next hops.
apply loadshare next-hop
By default, the next hops operate in
primary/backup mode.
8.
Set output
interfaces.
apply output-interface
{
interface-type interface-number
[
track
track-entry-number
] }&<1-
n
>
By default, no output interface is specified.
You can specify multiple output interfaces for
backup or load sharing by executing this
command once or multiple times.
You can specify up to 16 output interfaces for
a node.
9.
Enable load
sharing among
multiple output
interfaces.
apply loadshare output-interface
By default, the output interfaces operate in
primary/backup mode.
10.
Set default next
hops.
apply default-next-hop
[
vpn-instance
vpn-instance-name
|
inbound-vpn
] {
ip-address
[
direct
] [
track
track-entry-number
] }&<1-
n
>
By default, no default next hop is specified.
You can specify multiple default next hops for
backup or load sharing by executing this
command once or multiple times.
You can specify up to 16 default next hops for
a node.
11.
Enable load
sharing among
multiple default
next hops.
apply loadshare default-next-hop
By default, the default next hops operate in
primary/backup mode.
12.
Set default output
interfaces.
apply default-output-interface
{
interface-type interface-number
[
track
track-entry-number
] }&<1-
n
>
By default, no default output interface is
specified.
You can specify multiple default output
interfaces for backup or load sharing by
executing this command once or multiple
times.
You can specify up to 16 default output
interfaces for a node.
13.
Enable load
sharing among
multiple default
output interfaces.
apply loadshare
default-output-interface
By default, the default output interfaces
operate in primary/backup mode.
