250
Step Command
Remarks
3.
Enable BGP route refresh for a
peer or peer group.
•
Enable BGP route refresh for the
specified peer or peer group:
peer
{
group-name
|
ipv6-address
}
capability-advertise
route-refresh
•
Enable BGP route refresh and
multi-protocol extension
capability for the specified peer
or peer group:
undo peer
{
group-name
|
ipv6-address
}
capability-advertise
conventional
Use either method.
By default, BGP route refresh is
enabled.
Saving updates
To save all route updates from the specified peer or peer group (IPv4 unicast/multicast address family):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or
BGP IPv4 multicast address
family view.
•
Enter BGP IPv4 unicast address
family view:
a.
bgp
as-number
b.
address-family ipv4
[
unicast
]
•
Enter BGP-VPN IPv4 unicast address
family view:
a.
bgp
as-number
b.
ip vpn-instance
vpn-instance-name
c.
address-family ipv4
[
unicast
]
•
Enter BGP IPv4 multicast address
family view:
a.
bgp
as-number
b.
address-family ipv4 multicast
N/A
3.
Save all route updates from
the peer or peer group.
peer
{
group-name
|
ip-address
}
keep-all-routes
By default, the routes are not
saved.
This command takes effect only
for the routes received after this
command is executed.
To save all route updates from the specified peer or peer group (IPv6 unicast/multicast address family):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
