manualshive.com logo in svg

HP Vectra, User Manual, Page: 6 / 126

Share
Download
HP Vectra User Manual Download Page 6

WELCOME TO YOUR HP VECTRA PC

Congratulations on the purchase of your new Hewlett-Packard Personal Computer. Your high-
performance HP Vectra PC provides:

• 

a PentiumTM Pro processor in a Zero Insertion Force (ZIF) socket for easy processor
upgrades

• 

processor-integrated level-two cache for improved performance

• 

16 MB of ECC (error correcting code) memory, upgradeable to 256 MB

• 

an Ultra VGA PCI (Peripheral Component Interconnect) video controller with 2 MB of
video memory (upgradeable to 4 MB)

• 

an integrated Enhanced IDE (Integrated Drive Electronics) controller on the PCI bus
supporting Fast IDE and Standard IDE

• 

an integrated Ultra SCSI controller on the PCI bus supporting Fast-20 SCSI-2 (up to 20
MB-per-second data transfer rate) and SCSI Plug and Play (SCAM) compliant devices

• 

a 32-bit PCI 100VG/10BaseT Ethernet LAN controller

• 

seven mass storage shelves:
• 

five front-access shelves

• 

two internal shelves

• 

six slots for accessory boards:
• 

three 32-bit PCI (Peripheral Component Interconnect) slots

• 

two 16-bit ISA (Industry Standard Architecture) slots

• 

one combination ISA or PCI slot

• 

a quad-speed CD-ROM drive on the SCSI bus

• 

an integrated SoundBlasterTM 16 audio interface on the ISA bus

• 

headphones jack, microphone jack, and volume control on the front panel

• 

MIDI/joystick interface connector, audio Stereo In jack, and audio Stereo Out jack on the
rear panel

• 

Wavetable upgrade connector on the system board

• 

one SCSI connector, one parallel port, and two serial ports on the rear panel

• 

System BIOS and Video BIOS stored in Flash ROMs (for easy upgradeability)

• 

BIOS support for ISA “Plug and Play” accessory board configuration

• 

Optimized for 32-bit operating systems.

NOTE

The advanced processor installed in your HP Vectra
PC provides the best performance when used with
32-bit operating systems and applications.

Summary of Contents for Vectra































































































































Reviews:

No comments