HP Vectra XA 5 Series, User Manual

Page: 46 / 130

2 How to Install Accessories In Your PC
Installing Accessory Boards
34 English
Installing the Accessory Board
1 Disconnect the computer’s power supply cord and any connection to
a telecommunications network.
2 Remove the computer’s cover and power supply.
3 Find a free slot. Some boards may have preferred locations and
special installation instructions detailed in their manuals.
4 Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots. (See
diagram on facing page.)
5 Hold the board horizontally by its “top” edge. Slide it into the board
guide of the chosen slot. Do not bend the board. (See diagram on
facing page.)
6 Align the board’s connector with the slot’s socket and firmly press
into the socket. Ensure the board’s connector engages completely
with the socket and does not touch components on other boards.
7 Secure the board by replacing the slot cover screw.
If you loosened the screws on adjacent slots, tighten them. (See
diagram on facing page.)
8 If you install a VESA-standard video adapter board, connect the
accessory board’s cable to the VESA pass-through connector that is
on the Matrox MGA Millinium video board (refer to page 22). You
may also need to update the Video Submenu (Configuration group)
of the HP
Setup program (refer to page 42).
9 Install any other accessories before replacing the power supply and
the cover. Reconnect all cables and power cords.