HP Vectra VT 6/xxx, User Manual

Page: 29 / 168

English 17
1 Setting Up Your PC
Installing an Operating System
6 Restart OS/2 to use the new drivers.
Installing the
HP Video Driver
After successful installation of OS/2, you should install the HP video
driver from the “XU/VT Drivers and Documentation” CD-ROM.
1 Insert the “XU/VT Drivers and Documentation” CD-ROM in the CD-
ROM drive.
2 In the OS/2
System
folder, open the
Command Prompts
folder and click on
the OS/2
Full Screen
icon.
3 At the command prompt, type the following:
D:
CD VIDEO\DISK5
INSTALL /U
This will start an ‘unattended’ installation of the video drivers.
4 When the installation of the drivers has completed, exit from the
command prompt, shutdown the operating system, then restart the
system.
Selecting a Display
1 In the OS/2
System
folder, open the
Command Prompts
folder and click on
the OS/2
Full Screen
icon.
2 At the command prompt, type the following:
CD \MGA\OS2
MGAMON
This will start the MGA Display selection program. Choose your
display (monitor) from the list.
3 When this selection process has completed, exit from the command
prompt, shutdown the operating system, then restart the system.
Changing Display
Settings
1 In the OS/2
System
folder, open the
System Setup
folder.
2 Click on the
System
icon and change the settings (for example, the
screen resolution).
margeaux.bk : marg-ue1.fb4 Page 17 Monday, July 21, 1997 4:28 PM