HP Vectra VE 5/xx Series, User Manual, Page: 77 / 148

English 65
4 The HP Setup Program
Using the HP Setup Program
Hard Disk Drives (continued)
Cylinders* 944 Sets the number of hard disk drive cylinders.
Heads* 14 Sets the number of hard disk drive heads.
Sectors/Track* 40 Sets the number of hard disk drive sectors
per track.
Multi-sector transfers* 8 sectors Determines the number of sectors per block
for multiple sector transfers.
LBA mode control* Enabled Enable or disable Logical Block Addressing
mode in place of Cylinder Heads Sectors.
32 bit I/O Enabled Enable or disable 32 bit data transfer.
Transfer mode*
* Only available if “User” mode has
been selected as “Type”.
PI0 mode 3 Selects the hard disk drive transfer mode and
data transfer rate.
PC I Devices
Slot #1 Bus Master Enabled Enable this option if you need the BIOS to set
the PCI Bus Master bit. This could be
necessary for some old PCI cards.
Slot #2 Bus Master Enabled
Slot #3 Bus Master Enabled
PCI IRQ line 1 Auto Select an IRQ number only if necessary (for
example for SCO-UNIX).
PCI IRQ line 2 Auto
PCI IRQ line 3 Auto
PCI IRQ line 4 Auto
Setup Item Default Action
uno1.bk : uno1-ch4.fb4 Page 65 Friday, July 18, 1997 3:22 PM