HP Vectra VE 5/xx Series, User Manual

Page: 68 / 148

4 The HP Setup Program
Using the HP Setup Program
56 English
Using the HP Setup Program
Setup is an integrated (ROM-based) program that displays the PC’s
configuration and allows you to set parameters.
Check the configuration when you first use the PC and each time after
you install, remove, or upgrade accessories.
If an error message is displayed, see chapter 5, Troubleshooting Your
PC.
NOTE If you are unable to change the PC’s configuration, check that you
entered the correct password when you started
Setup and whether the
Secure switch (system board switch 8) is set to the OPEN position. For
further information on switches refer to “System Board Connectors and
Switches” on page 104.
The BIOS Setup is menu-driven, enabling you to easily access all the
options which are grouped in the following categories:
•
Main
•
Preferences
•
Configuration
•
Security
•
Power, and
•
Exit.
A solid right arrow, , indicates categories which have sub-menus.
Starting the
Setup
Program
1
Turn on the display and then the PC.
If the PC is already turned on, save your data and exit all programs,
then press
and to restart the PC (Windows 3.11).
For Windows 95, use the
Shut Down
command in the Start bar,
and then Restart.
Delete
uno1.bk : uno1-ch4.fb4 Page 56 Friday, July 18, 1997 3:22 PM