HP TOUCHSMART TM2, Maintenance And Service Manual

Page: 62 / 115

Pen holder and eject assembly
Description Spare part
number
Pen holder and eject assembly 592972-001
Before removing the pen holder and eject assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see Battery on page 35 ).
5. Remove the following components:
a. Hard drive (see Hard drive on page 37 ).
b. Memory cover (see Memory module on page 40 ).
c. Top cover (see Top cover on page 48 ).
Remove the pen holder and eject assembly:
1. Remove the three Phillips PM2.0×4.0 screws (1) that secure the pen holder and eject assembly to
the base enclosure.
2. Remove the pen holder (2) and eject assembly (3) from the base enclosure.
52 Chapter 4 Removal and replacement procedures