manualshive.com logo in svg

HP TBD, Maintenance And Service Manual, Page: 45 / 79

Share
Download
HP TBD Maintenance And Service Manual Download Page 45

NOTE:

The SIM cable is included in the Cable Kit, spare part number N02955-001.

Before removing the SIM cable, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 31

).

2.

Remove the bottom cover (see 

Battery on page 33

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 33

).

Remove the SIM cable:

1.

Release the zero insertion force (ZIF) connector (1) to which the SIM cable is connected, and then disconnect 

the SIM cable from the system board.

2.

Release the ZIF connector (2) to which the SIM cable is connected, and then disconnect the SIM cable from 

the connector board.

3.

Detach the SIM cable (3) from the computer. (The SIM cable is attached to the computer with double-sided 

adhesive.)

4.

Remove the SIM cable.

Reverse this procedure to install the SIM cable.

Sensor board cable

To remove the sensor board cable, use this procedure and illustration.

NOTE:

The sensor board cable is included in the Cable Kit, spare part number N02955-001.

Before removing the sensor board cable, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 31

).

2.

Remove the bottom cover (see 

Battery on page 33

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 33

).

38

Chapter 5  Removal and replacement procedures for authorized service provider parts

Summary of Contents for TBD
















































































Reviews:

No comments